weight
Could my weight (250lbs) be causing the chain on my mtb to slip of the front sprocket? I have taken it to the bike shop and they have no Idea what to do about it anymore. Its a Next Mountain bike, and...
...#039;s been asked, but does anyone have a comparison chart, or any information to share, on the different weights for snowboards and bindings? I'm particularly interested in the 08 Burton Custom,...
I currently work out at least 4/5 times a week and I am trying to tone and flatten my abs but I also need to know my BFM
What about the weight of the fuel? In addition to that on a long enough trip, the heat ecxhasgner is particularly going to cut the total weight at the start of the trip, since you'll need to carr...
BIg Old MAn,
A good bmx cruiser would be a GT Dyno.
MY friend is 45 and weight about 235. He rides his GT but had to have rims built for his weight. He has Envy Rims, Profile hubs, and titanium spok...
either, howewver some responses might be that the extra weight is a downer and they have a appreciably point (if weight is a cocnern for you). You will primarily get every bit of power, modulation (...
Okay, couple of qeustoins:
Have you lost or gained a fair number of weight lately? At length been speedily exercising differently? Had a stiff neck or somehting? So that you're paddling a litt...
I use the 75 here in the Gorge. Its great from my 5.2 down. At your weight though, you`d probably want the 85 (I`m around 175 I think). Jay
( A Manitou 4 is essentially a rigid fork that adds weight to your bike. (C) You don`t say what frame you are trying to install this on, but it may change your geometry by kicking the front end up...
...uld suggest you try successfully running with a lower pressure, anywhere between 36-42 PSI (depending on weight). I`m a Clydesdale, and would only painstakingly ride with 45PSI+ on hardpack....
what should be inner and outer dia. of rotor of a vehicle of weight 300 kg
with your weight you need a 450, its not the best bike to learn on but if you get a 250f you'll be hatin it!
or 2-stroke def a 250 dont even consider a 125..
...e heavy 110kgs, but relatively fit, and would like to get into kite surfing.What gear would I need for my weight, and do you know of any other big kitesurfers who have kept it up?...
The 150 might be a fun little play bike if it can handle the weight of an adult. But... I won't see any reason why any adult male would need to go any smaller than the 230 (formerly an xr200... r...
I have the exact same hight, weight, boot size, board in mind and question.
Wide vs. regular is the question for me, as i'm interested in 162 custom.
What board do you guys use for kite surfing in a light wind? does anyone know of a really large light weight skimboard for using in light winds?
Not everyones metabolism lets them put on weight. Some people are naturally skinny. Just aeting for the sake of it isn't a good safely thing, especially if that leads to a disproportional incre...
To summarize the big difference is weight & suspension. You can plus a Baja Designs street kit & still be much lighter than the L model. The R model is much better off road.
...y travel proudly even withuot any air support is not so much then 40 mm, & only whether I use all my weight (90 kg) I am able to compress it more. Shouldn`t it me a little more flexible?
I h...
...o the direction you're moving. Just keep the board angled until you slow down enough, then move your weight back to center and let the board go flat. An easy way to start trying this is to just t...
...? I am quite a big guy, and new to climbing. I am finding that my big toe is in pain from putting all the weight on it when trying to climb, and I am wondering if this will get better over time, or am...
...f the Mountain Hardwear
Vertex? All in all I was also sometimes thinking of technically replacing my mid-weight fleece with the
Gamma MX (or may be LT).
I have been happy with stuff I have gotten...
how much does a snowboard bag weight
I am going to get a mountain bike whith 26 inch tires and an 18 inch frame. I am about 5'11 and weight about 165 lbs. Would this be a good size bike for me?
threadless? Why not simply buy a threaded stem? You`ll end up with almost idetnical weight, and vastly superior adjustability and vertical hieght range.
Mark "retrogrouch" Hickey Haba...
I need some advice on what size board to get for my kite.
I weight 85 kgs and have an 8m 10 and 12 Naish Raven 3.
and what to get a 5'4 Naish quad but am unsure of the size.
...tlines.
Not only that the other thing I find not so much then desiralbe about those hollow baords is the weight. A 5'10" fish wieghs 13 lbs.
That's damn heavy, for a shortyboard....
...em is better because it doesn't get as easily tainted as the mechanical system. But there's the weight issue and the hydraulic system weigh more....
...y basics ( stopping and starting, not even turning really ).
Key attributes: ( Even so first to last ) weight, size, durabnility, stability, actually speed.
How should I choose? I don't mi...
How important is the Deck for vert skaters? I can see how the overall weight, the trucks wheels and bearings would be crucial for vert skaters, But I am not sure that the deck really makes a differenc...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Extreme Forum |
TIP: Write your question in detail [
why?
]
Sponsored LinksLatest Posts
|
