problem
Hi
After many year of being perfect the infusion valve in my t3 has started to malfunction, making it almost impossible to pump the kite to the appropriate firmness. Does anyone have any Ideas on how...
I just gotten a new Sugar 2, & Im consecutively having some problems. The first thing I did when I got the bike is put on a set of relatively new XTR cranks (4 mos. As usual old) Although with ...
...which's what made it stick. Not sure what kind of "crud" it was though.
Anyone have this problem?
Thanks!
Chad (dirt bike newbie)...
I own an X-Treme X250 scooter. I'm having a problem with the oem plastic rear wheel. This wheel will not take less than 200lbs, although the scooter is rated at 300lbs. Is there an aluminum wheel...
i'ev got a yamaha 1200 xl..and the problem is i've got no power but when i bridged the solenoid the engin tried to start but no fuel came ..could it be the solenid or there is an other prole...
... I have a set of 38mm F/S on my FJ1200. The problem that I am having, is the throttle is sticking wild on..... With the filters off, I can see that the slides are closed...... need help
Than...
hey,
im having a problem with my 3rd cylinder on the sl750. the piston is bad and i need to replace it. in my experience with these motors the whole cylinder comes out and can be replaced. is there a...
i just got some cranks.but when i put them on my bikeand they didnt feel right.the cranks arent flat.can any one help me
I know some 1 who has an 02Honda CR250, he has allready been into the crank case becuase " it was knocking ", they found nothing out of tolerance and put it back together,it is still there ...
... I do something WRONG...Is it possible the new engine have a different HEIGHT?
Anyone ever has the same problems? Any advice is appreciated. Thanks...
Although has your daeler been asked to help with the problem?
Give KEVIN at BALDY'S a call at 517-663-5851
To see the awesome potentail of the GasGas EC200 goto WWW.BALDYS.COM & c...
Hi
Anyone got any Idea how I can fix this? Information on Foil repair would be appreciated.
Thanks
Moreover sorry to chime in late. I may be way off, since my 4-stroke is a dinosaur.
But, I had the same problem with mine, plus a few extra problems for good measure. Anyway... My problem was both...
They're not the problem. It's the multi-milion/billion dollar ones that are the problem.
...ht, I skate regular so picture that in your head. I've mentioned this before and I had the exact same problem when doing stationary ollies. I wish I would took note of how I fixed that problem. W...
I have played with the clutch cable in every way and still can not solve the problem.
Could this be a tranny problem ?
..., I get an audiable alarm and my LED flashes "Exhust," the manual states this is an over heating problem. High speeds are no problem, only when I have been cruising at low speeds for a peri...
I had a problem with water in my fuel and had to replace the fuel filter. After replacing the filter, the engine does not have full power output resulting in lack of speed and acceleration. Does any...
I have two yamaha 1200s. both are having the same problem. When at an idle both seem to be okay, but when you accelerate and get to about 15mph they both die. once they die they were very slow and h...
While I did have 1 bad fall, witch aint realy the problem. I have a problem making my way down those narrow traverses without bein a danger to myself or others. I'm looking for a better way to ...
we currently have a polaris waverunner 2000 Virage in our shop. The problem we are having is in RPM's. It will hit 7000 easy in the yard, but when we get it in the water it won't go of 350...
...ned, and they`d been strained without my realizing it, setting me up for hurting the tendon.
My next problem was that I play guitar. So even though I stopped climbing, I didn`t lay off guitar f...
...entre not my GP becasue i slept up my friends house i went there as it was close and wanted to no what the problem was fast..and no she only looked in my ear told me the problem and jst said to apply ...
An error. Sorry, I think you got a problem with your electrical systems (although it runs good off water). The best advise I can give you (not owning one myself thus not based on having experienced th...
...the very far cortner (of course) and desperately stopped. Altogether I rode down on his 70 to see what the problem was. The rear wheel wouldn't turn at all. After a few choice words and isnpetcio...
The problem is not the lanyard but the DDS it plugs into. The reason a new battery fixed for a while is because the DDS is breaking down on low voltage. You'll find that if you give your batter...
...t has 84 hrs and was kept in an air conditioned garage. I just discovered that Yamaha has known about this problem as well as all the Dealers in Houston.
The problem is that the Lube line slips out o...
I've gotten a problem with my 2001 EXC 200.
It all fatally started with a top end rebuild.
Naturally the bike would bog down as soon as I open the throttle, but would start fine.
I took the h...
If the bike has alot of hours on it, part of his problem may come from wear on the needle and needle jet. Vibration makes the needle buzz in the jet when the slide is at low throttle openings, and the...
...e what happened. If they do do something for you, it both admits liability, and it implies that there is a problem with the product, neither of which is worth keeping you as a customer.
You really ...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Extreme Forum |
TIP: Write your question in details [ why? ]
Sponsored LinksLatest Posts
|
more posts...