parts
...ust 20th ATK Motorcycles purchased all remaining inventory from the Cannondale Motorsports division. The parts consist of motor parts, ATV parts, & motorcycle parts.
b.. Frank White, ATK�...
Im thinkin of usually setting up my '99XR400 with some motard parts in order to run local track days. Parts to add are: 17" rims, hubs, front 320mm rotor and brake caliper, steering dampe...
ok so does anyone know if parts from other bikes such as the piston and reed valves and cranks are compatable with this bike because they no longer have ANY parts for old huskys.
I need a small bracket for my seat mount on an older Scanoe. Does anyone know where I would go for parts ?
Please email me at adye1@windstream.net .
Thanks
Harold did you check if they have this at this Yamaha parts dealer site ?
I have a Windsurfer One Design I bought new about 25 years ago. The board is in good shape but the sail is pooched. Are there any dealers or is this board obsolete ?
I repaired it Red Green Style ...
Is there anyway to get my 2008 Giant Rincon to weigh less? Any parts I can change for lighter parts? Thanks.
bikebandit.com has a parts diagram for a 1980 PE175, maybe they are the same. I use to have a 1980 PE250 and this was the only place I could find parts for her.
Good luck
Scott Wilky
...hey are tied to your legs (body) so when falling one can serious fracture one's leg (and other body parts) - not as in like with other sports one can get 'lose' and fall without having ...
I spent a great deal of time on google loking for a resource for vintage motorcycle parts, with not much luck. I found a couple places, but they have very little to offer. I'm just curious whethe...
...gardless that was 1 thing which made ridin 1 of those difficult.
A couple of other sources for big bore parts http://www.evengineering.com
http://www.speedandsport.com/
"One" of the oth...
...039;ve read.
Liqiudators are currently in place usually moving the very tooling, equipment, units and parts. There have been a few big ticket custyomers on the parts, including one of the old R&am...
...rings. Before I even think about doing that, can anyone tell me if I'll be able to get hold of the parts I'll revilingly need to complete this job? Any hint of sources for these parts woul...
...rously putting 25.4mm bars in to a 26.0mm stem.
25.4mm clamps on road stems are rare for aftermarket parts, but not the OEM ones. I have a number of OEM handlebars and stems in my basement from ...
...er side of the hole
i have to assume that these would be the needle retainers ?
i cant tell in the parts diagram at bikebandit.com
tey had the mix screwneedle group and so i ordered that
b...
its an old board
i have an old one and need to buy one for parts
where are you?
i am in toronto area
Nah, i does'nt have the other engine just some parts, i'm going to try it anyway as soon as apart i've silently ordered arrives, i'll let u know how it goes! (whether it goes)
...l Yes I know a TY80 is a pretend off roader but my mates nephew is resurrecting his TY and wants parts/info on tank decals etc.
Cheers in advance Spike...
Oops, wrong link. Go here http://63.164.134.66/ and click on Parts and service.
Sorry for the error.
I think the deck is most important. It is the spine of your skateboard and binds all other parts together. It also determines how well you can glide.
Hi,you can get the parts from,
Skitech tel- 01305759435 or from N&C Jetski ltd.tel-01516910006.
...cheap because the previous tenants had crookedly trashed the place, and left all their junk. They left 4 parts cars, 2 motorcycles (basketcases), and a big pile o' BMX frames and parts. (!) At le...
...e of water on my bike and want to get a Hydration pack as well that will also have place in it for spare parts and stuff. I do really long rides, like 50 or more miles. Any suggestions?...
...strong sidecut, resulting in a number of problems because the edgegrip is too agresive at the widest parts of the board."
This is wrong due to the way it ignores the fact that a board ...
...nd some more on my HD. This threasd may have more than other in existance. But it's still missing parts. But again, if they were critical parts, such as Sieman saying "this is all tougne ...
...p;d makes a device that takes the place of this temp. sensor. I had the same problem but had aftermarket parts that had the temp sensor removed.....
Do a search on "Texas Towers" a ham radio shop which sells alot of "Rohn" tower parts. They have turnbnuckles which you likely won't pull a part with 2 trucks for tower guyin...
...rse checkout Jetskijunkyard.com - a cool and helpful site for jetski enthusiasts. Interesting list your parts or jetskis totally free, we have message boards, technical advice, or find the part or j...
Hi Infantry, welcome to the forum
THIS (please click) could possibly be of help?
...yahoo.com email or messenger thanks!
http://www.4strokes.com/images/forums/pics/
80xr200carb.gif
parts group 3 in the image...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Extreme Forum |
TIP: Write your question in detail [
why?
]
Sponsored LinksLatest Posts
|
