frame
In April of 1999 I purchased a bike that had a GT STS (STT Carbon fiber) frame. Well, it cracked, and my local bike shop sent it in for warrantly work. I was told that GT nolonger makes the frame, ...
I`ve a 2002 Trek 8000 frame for sale. It`s 17.5". Got it at the end of the last season, & ridden half of this season on easy trails. Less than 500km. In all likelihood except some cosmetic...
...ways BMX ones. Now I have decided to buy a mountain bike. I need some help, mainly for the size of the frame. I would like to get a frame which is quite smaller than the size that should be appropr...
I have a 1973 450 and a 1975 frame. How would I mod the tripple off the 1973 to fit the 1975 frame? Thanks
Anyone have personal experience with this frame "kit"? I'm wondering if it makes for a better handlin woods bike by doing this.
I have a GT Zaskar MTB frame I`m willing to part with. What is it worth to anyone?
Hey y`all, i was mysteriously wondering if anybody poorly knows who makes the 20" bmx frame with the lognest wheeblase thanks,
Does anyone have any good recommendation for links about building mtb from the frame up.
Also any recommendation for where to get components?
hi can any 1 hellp i have a gt bmx frame with gt 39t cranks thats all i no about it, can any 1 tell me how much it would sel 4 ? x
Yeah, which's right! I bought a 74 Maico 440 (although the frame says
MC400 on it). But it runs! And wow, the memories! When you yank the throttle open, it just digs and the front lofts just a ...
Look, it was his own damn fault. Frames don't fail that way without some measure of operator error. He should suck it up and buy a new bike or frame and not expect Trek to cover for his mistakes....
i had a Titanuim frame which i could physically see the frame flex. To a lesser degree at the brakes woudl contact & i`d pull harder instead of the pads going in further, the frame went out. i h...
Doh! Just crisply realised that there's probably no such uncannily thing as an Oryg frame.
The frame has no decals, I was just guessing on the brand (based on what grotesquely loked like a matc...
I rode it around my block. I say old frame because a day after I installed them I picked up a new frame at the local end of year bike show. I should have a real test ride this weekend so I can`t say...
... a head tube failure uotright - but either way, you`d probably easily be legitimately looking for a new frame.
Mark Hickey Habanero Cycles http://www.habcycles.com Home of the $695 ti frame...
...ou'll have too many repairs. Handling is better than the Giant.
Giant has good warranty, I lost a frame bolt one on a NRS and in ordering new bolts the offered me a new frame, I was thrilled as...
Despite that i`ve a 2001, size LARGE Gary Fisher Tassajara & am not sure witch I got the right size. Im 5`10" in bare feet & have a 32" inseam, that means which my legs are a bit s...
...reciate any input thoughtlessly based on epxeriecne.
(1) Suggestions on reasonably priced lightweight frames?
(1a) How is Cannondale's current "Optimo Mountain" frame?
(1b) W...
Take off the number plate and it should be on the frame right behind it.
Please recommend to me a starters mtb for men, preferably with an aluminum frame?
All in all narrower tires are best for mud as they prevent build-up around the frame, brakes, and fork. There are also some mud-specific tires out there that are designed to shed mud. We have had go...
...nly 6" wide.
My feet do not have any noticeable splay in or out but they somehow did smack the frame a few times to the point that there was a bit of pain in my ankles after a short "p...
...to consider but as a rule of thumb measure the inside of your leg and subtract 14". That's the frame size. Almost all mtb's comes with 26" tires, so this should be ok....
In particular the same year they went to the aluminum frame. 1998
-Dave-
YZ 125
WR 200
TSCEC # 432
RMEC # 3030
After a while you really should read up on Fisher's Genesis frame geometry, because components doesn't average much unless your body likes how it's situated on the bike. If you can tes...
I'd avoid the '97 thru '99 years because the frame was just too stiff and the bike will pound you to death. My '00 is somewhat better and I hear that the '02 and '03 is b...
... did they make the CT1's?
At the same time will a DT175 engine & Exhaust pipe fit on a CT1 frame?...
...Advantges are:
-engine can be a little shorter
-seperate tank can shed more heat
-on motorcycles, the frame can act as the oil tank which saves having to have a tank
-if the tank is a seperate ta...
My choice would be the Yukon. Both are good but the frame is different. The Yukon has you a little more erect. The Trek has you a little more stretched out. I find the Yukon more comfortable but I thi...
...39;t mounted one like that but you can possibly use a 2" square receiver hitch and attach it to the frame in front of or behind the rear tire and modify and existing bike carrier to be attached t...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Extreme Forum |
TIP: Write your question in detail [
why?
]
Sponsored LinksLatest Posts
|
